Top 7 Types of Medicine Packaging

When it comes to the packaging of pharmaceuticals, the industry has so many options for all types of medicines – be it liquid, powder, or solids. Every product type has a packaging solution. The medicine packaging is mainly categorized into three main types that are primary, secondary, and tertiary packaging and all of the packaging solutions come under these types. The primary purpose of every packaging is to keep the content packed inside them secure and protected. If you are here to learn about the top packaging, then you have come to the right place. In this article, we have mentioned the top 7 packaging that are used to pack medicines. To learn about them, continue reading!

Ampoules

Ampoules can be referred to as small sealed vials that are commonly made of glass or plastic. They come under the primary medicine packaging type, which is the one that first envelops pharmaceuticals or drugs. Ampoules have been in use in the pharmaceutical industry for quite a long time as a primary packaging solution. If you ever been to any medical store or a doctor, you might have noticed that injectable are packed in this type of packaging. All the liquid medicines are commonly packed in Ampoules that certifies the protection of the liquid drug from the air, moisture, and other contaminants. For keeping the liquid medication safe, ampoules are sealed by melting the thin top using an open flame. When it comes to opening them, the head is snapped off the neck. Glass ampoules are comparatively more expensive than other types of drug packaging.

Blister Packs

Blister packs, which are also known as compliance packs or bubble packs, also is the most common primary packaging type. The general purpose of blister packs is to hold formed solid unit doses of medicines. In Europe, solid unit doses are packed in blister packaging 85% of the time, whereas only about 20% in North America. Blister packaging is a term for numerous types of pre-formed plastic, paper, or foil packaging. Plus, a cavity or pocket that is made from a thermoformed plastic is the main element of blister packaging. Blister packs usually have a backing of paperboard or a lidding seal of aluminum foil or plastic film, which can be easily punctured by hand.

Bottles

The bottle packaging is probably the most significant means of medicine packaging that has been around since the 19th century. The bottles are usually made of glass or plastic that is tinted to help protect the medicine from UV light which can potentially affect the effectiveness of the content. The most common colors in which these bottles come are orange and light brown because these two colors prevent ultraviolet light from damaging the potentially photosensitive substances. The bottles that are made from glass are frequently used for liquid pharmaceuticals because of their exceptional barrier properties. Plastic, on the other hand, is used for tablets and capsules.

Vials

Vials, which are also a primary packaging, are small bottles or containers made from either glass or plastic. They are used to hold solids, liquids, or powder dosages. Vials are generally bigger as compared to ampoules with a larger capacity. When it comes to glass vials, closure systems are screw vials, lip vials, or crimp vials. Screw vials are closed with a dropper or a screw, and lip vials are closed with a cork or a stopper whereas crimp vials have a closing of a rubber stopper or a metal cap. On the other hand, plastic vials can have other closure options, such as 'hinge caps' which can snap shut when pressed.

Sachet Packaging

Another primary medicine packaging! Sachet packaging is a rectangular or square sealed pouch that is often made of some type of plastic. They are nest best suited to pack powdered pharmaceuticals but also is the best option for packing liquid medicines. Sachet packaging comes with both re-sealable and single-use options. Moreover, they are perforated so it can be more convenient for the patient to torn open them by hand

Secondary Medicine Packaging

not packed in medicine boxes

Tertiary Packaging

The primary purpose of the tertiary packaging is to keep both the primary and secondary product packaging safe from external influences during transportation. This packaging provides the handling of medicines in bulk and shipping of pharmaceuticals from one destination to another. This packaging is most significant for shipping and transportation purposes. The most popular packaging materials that go into making tertiary packaging are plane boxes, cardboard, and shrink wraps.

Lastly!

medicine packaging

My name is Jennifer Dalton. My hometown is Delaware but recently shifted to Illinois USA. I have completed my degree in Marketing. I’ve 4 years of experiences in multinational companies relevant to printing and packaging. Currently, I’m working with PakBoxes, printing and packaging manufacturer in USA. I’m focused on managing marketing strategies to provide customized solutions. Besides the marketing, I love to share information with the people around me, it helped me a lot in writing. So, while defining Jennifer, I can say a passionate contributor and experienced digital marketer.
Follow
4.7 Star App Store Review!
Cpl.dev***uke
The Communities are great you rarely see anyone get in to an argument :)
king***ing
Love Love LOVE
Download

Select Collections