Whether it's a renovation or a new construction, linear shower drains are the choice for almost any bathroom. Installing a linear shower drain, particularly Easy Drain, is easier than you think. In this article we give you a brief explanation on how to install a linear shower drain in 10 steps.
1. Choose the location
A linear shower drain can be installed in 4 different ways: on the wall (one side or three sides) or on the floor (free on the floor or between two walls). Be sure to install the proper shower drain model for the location you have in mind. Regardless of the location of the shower drain, the floor should be slightly sloping towards the channel to ensure that the water is drained. When the slope to the drain is insufficient or non-existent, the water accumulates and floods the bathroom.
2. Prepare the work area
Before beginning the installation process, check that the floor and work area are clean. It is also important to ensure that no dirt of any kind comes into contact with the shower drain during mounting. You can protect the drain using the pre-installed (folded) sealing membrane or cloth. Before installation, the assembly process and its special characteristics should be clarified with the installer. After assembly make sure you know the complete assembly along with the installer.
3. Calculate the height of the shower drain
You must first determine the height of the shower drain. Don't forget that the tiles must be leveled or 1 mm above the highest edge of the shower drain to ensure optimal water drainage. When calculating the total depth, consider the thickness, tile adhesive layer, and leveling layer.
4. Place the integrated set
After creating space for the shower drain, the built-in set must be inserted and aligned and leveled. This can be accomplished using the height adjustable feet.
5. Connect to the drain pipe
We recommend replacing drain pipes with a diameter less than 50mm. It can happen in renovation projects where a shower tray has been installed. The shower drain must first be connected to the drain pipe and ensure that the drain pipe is sufficiently sloped. Slide the drain to the connector, no need to stick it as the connector offers enough sealing. Check the waterproofness of the shower drain and drain connection to prevent leaks.
6. Create a sloping floor
Create a proper slope in the floor to ensure that the water goes to the shower drain. To avoid gaps under the drain, make sure enough material is used that connects to the top edge of the drain frame.