If you've ever wondered how to connect a hose to your sink faucet, you're not alone. There are many ways to do it, from using a simple hose clamp to relocating a valved water line. The following steps should help you figure out the proper way to connect your hose.
Need a hose clamp
First, you'll need a hose clamp. These are inexpensive and widely available. You'll need to buy one that is at least 1.5 inches larger than the diameter of the faucet. Hoses can detach from the Water Bandit faucet after repeated use, so make sure to get a hose clamp with extra room. Hoses are also important to consider because they can build up pressure. To avoid this, you'll want to find one that is kink-proof.
Use a pull-out spray hose
If you're using a pull-out spray hose, the hose should be attached to a hose that comes down from the faucet body. When you remove this hose, be careful not to damage it with your fingers! You may need a screwdriver to pry up the spout.
Wear protective clothing
Make sure to wear protective clothing while performing this task. You'll need to be comfortable, so it's a good idea to put a pillow underneath. You'll also want to wear safety glasses to protect your eyes from debris. Also, be sure to turn off any electrical outlets before you start.