Okay, everyone needs to stop what they're doing and make this cute project. I don't know any kid that wouldn't love to make this and play with it! Perfect for setting up roadside lemonade stands before school starts!
What you need:
Calculator with large buttons (Does not have to function)
Cardboard box (Larger than calculator)
Plastic Container (Smaller than cardboard box)
Extra Corrugated Cardboard
Paper Towel Roll
Hot Glue Gun
Mod Podge and sponge brush (optional)
First you’re going to make the cash register’s display.
Trim your paper towel roll to fit your cardboard box.
Trace both ends of the tube onto your corrugated cardboard to create two circles.
Cut those out.Cut out 12 cardboard pieces (approx. 3 1/2″ x 1″) to display your digits (0-9), dollar sign, and cents sign.
Cut a slit in your paper towel roll to fit your cardboard pieces.
Now you’ll make the cash register’s pressable buttons.
Measure the size of your calculator’s keypad.
Draw a corresponding sized rectangle onto a piece of paper.
Move that rectangle around on the top of your box until you’ve found the right spot to cut your hole out.
Once you’re satisfied, trace the rectangle and cut it out from your cardboard box.
Now you’ll make the sliding cash drawer.
Cut off the bottom of your box.If your box is too tall, trim it’s height so that it fits the calculator and your plastic bin cash drawer inside.
Measure your plastic bin and cut out a corresponding hole in the bottom side of cardboard box.
Trace your cardboard box onto a piece of corrugated cardboard.
Cut that rectangle out to create a new bottom for your cash register.
Cut out extra cardboard bits to act as the credit card slider (two long rectangles) and extra buttons.
(Optional: Once your paint dries, use Mod Podge to protect your paint job.)
Now you’ll put the inside of the cash register together.
Tape your calculator to the bottom of your cash register so that its buttons poke through the rectangle opening on top.
Cut out two rectangles from your corrugated cardboard. One will act as a wall, preventing your cash bin from sliding too far into your cash register.
Tape this one inside the box. The other rectangle will act as a barrier preventing your cash bin from sliding all the way out.
Tape this rectangle to your plastic bin.
Now you’ll put the outside of the cash register together.
Hot glue the bottom of the cash register on.
Hot glue your cash register’s display, credit card slide, and buttons to the top of your cash register.
All that's left to do is PLAY!